
Residual Oxygen Meter and Purge Monitor from DWT PipeTools, supplied by TEC in the UAE
The DWT Residual Oxygen Meter and Purge Monitor range from DWT PipeTools (Germany) includes 3 models: Residual Oxygen Meter Oxy Pro, Weld Purge Monitor for welding, Purge Monitor for Welding. It is designed for professional pipe cutting, weld preparation and pipe welding work in workshops, fabrication yards and on site.
Genuine DWT PipeTools equipment, supplied and supported by TEC in the UAE.
Compare the models and technical data below, then contact TEC with your pipe size, material and wall thickness. Our team will recommend the right Residual Oxygen Meter and Purge Monitor and matching accessories for your job.
| Residual oxygen meter Oxy Pro | |
|---|---|
| Measuring range | 5 – 999 ppm O2 |
| Power | 110V – 240V |
| Interfaces | USB, 0-5 VDC, digital |
| Dimensions (LxWxH) | 185 x 93 x 36 mm |
| Weight | 0,60 kg |
| System language | English and German |
| Power duration | Up to 8 hours |
| Sensor type | Zirconium oxide |
| Weld Purge Monitor for welding Pro Ox 100 | |
|---|---|
| Measuring range | 0,01 – 21,00 % O2 |
| Calibration | 20,9 % |
| Gas for calibration | Environmental air |
| Response time | 15 seconds |
| Warm-up time | Irrelevant |
| Substantial humidity | 0 – 95 % non-condensing |
| Operating temperature | 0° – 50°C |
| Storage temperature | 3° – 20° C |
| Sample flow | 1.0 LPM max. |
| Proofe pressure | 10 PSI |
| Power | 9V NiMh battery |
| Power duration | Up to 2 hours in trial mode |
| Sensor type | Electrochemical oxygen sensor |
| Sensor life | 12 months |
| Recommended calibration interval | weekly, depending on use-frequency |
| PC interface | USB Type B |
Models and data as published by DWT PipeTools. Contact TEC for prices, stock and delivery in the UAE.