Skip to main content

TEC

Authorised Nord-Lock distributor · UAE

Nord-Lock wedge-locking washers, available in the UAE

Nord-Lock washers keep bolted joints tight under vibration and dynamic loads, using tension instead of friction. As an authorised Nord-Lock distributor in the UAE, TEC supplies genuine Nord-Lock washers, the full standard range in steel and stainless steel, regular and enlarged diameters, with special alloys on request. Choose your option below and send your enquiry straight to our sales team on WhatsApp.

Authorised Nord-Lock distributorGenuine, batch-traceable washersUAE and GCC supply
Enquire on WhatsApp
Nord-Lock wedge-locking washer pair

How the wedge-locking principle works

1

Paired washers. Each set is two washers with cams on the inner faces and teeth on the outer faces.

2

Teeth grip. On tightening, the teeth bite into the bolt head or nut and the mating surface, so they cannot slip.

3

Cams lock. The cam rise is steeper than the thread pitch, so any loosening rotation increases bolt tension and stops the bolt turning.

Nord-Lock options we supply

The four standard Nord-Lock ranges. Regular washers have the standard outer diameter; enlarged (sp) washers have a wider outer diameter for oversized or slotted holes and softer surfaces.

Most popular

Nord-Lock NL

Steel, regular outer diameter

  • MaterialSteel EN 1.7182, through-hardened (min. 465 HV1)
  • FinishDelta Protekt® zinc-flake coating, about 1,000 h salt spray (ISO 9227)
  • SizesM3 to M130 (#5 to 5″)
  • BoltsFor steel bolts up to grade 12.9
  • Temperature-50 °C to +200 °C

General steel bolting: machinery, structures, vehicles, rail and plant equipment.

Pick a size to enquire on WhatsApp:

Wide shape

Nord-Lock NLsp

Steel, enlarged outer diameter

  • MaterialSteel EN 1.7182, through-hardened (min. 465 HV1)
  • FinishDelta Protekt® zinc-flake coating, about 1,000 h salt spray (ISO 9227)
  • SizesM3.5 to M36 (#6 to 1 3/8″)
  • BoltsFor steel bolts up to grade 12.9
  • Temperature-50 °C to +200 °C

Larger bearing area for slotted or oversized holes and softer surfaces such as aluminium.

Pick a size to enquire on WhatsApp:

A4 / 316L

Nord-Lock NLss

Stainless steel, regular outer diameter

  • MaterialStainless steel EN 1.4404 (A4 / 316L), surface-hardened (min. 520 HV0.05)
  • FinishUncoated stainless, PREN 27
  • SizesM3 to M80 (#5 to 3 1/8″)
  • BoltsFor stainless bolts up to A4-80
  • Temperature-160 °C to +500 °C

Stainless assemblies in food, water, marine-exposed and outdoor installations (non-chloride, non-acid).

Pick a size to enquire on WhatsApp:

A4 / 316L wide

Nord-Lock NLspss

Stainless steel, enlarged outer diameter

  • MaterialStainless steel EN 1.4404 (A4 / 316L), surface-hardened (min. 520 HV0.05)
  • FinishUncoated stainless, PREN 27
  • SizesM3.5 to M30 (#6 to 1 1/8″)
  • BoltsFor stainless bolts up to A4-80
  • Temperature-160 °C to +500 °C

Stainless joints with oversized or slotted holes, or softer mating materials.

Pick a size to enquire on WhatsApp:

Special alloys for harsh environments

For seawater, chemicals and high temperatures. Sizes shown as regular / enlarged range.

MaterialGradeSize rangeTypical use
254 SMO® (NLss-254 / NLspss-254)EN 1.4547 super-austenitic stainless, PREN 45M3 to M39 / M3.5 to M27Seawater, chlorides, desalination, heat exchangersEnquire
Alloy C-276 (NLss-276 / NLspss-276)EN 2.4819 nickel alloy, PREN 68M4 to M20 / M8 to M12Acids, chemical process, offshore downholeEnquire
Alloy 718 (NLss-718 / NLspss-718)EN 2.4668 nickel alloy, up to +700 °CM4 to M20 / M8 to M12Gas turbines, turbochargers, high-temperature exhaustsEnquire

Quick selection guide

Your applicationChoose
Steel bolts up to 12.9, standard holesNL
Steel bolts, oversized or slotted holes, soft surfacesNLsp
A4 stainless boltsNLss
A4 stainless, oversized holesNLspss
Seawater or chlorides254 SMO®
Acids or chemical processAlloy C-276
Above +500 °CAlloy 718
Nord-Lock washers and packaging

Fitting tip: always install the washers as a pair, cams facing each other, and tighten to the torque specified for your bolt.

Frequently asked questions

Is TEC an authorised Nord-Lock distributor?
Yes. Technical Equipment Company LLC (TEC) is an authorised Nord-Lock distributor in the UAE, supplying genuine Nord-Lock washers with laser-marked, traceable batch numbers, along with technical support for selection and fitting.
How do Nord-Lock washers stop bolts loosening?
Each Nord-Lock is a pair of washers with cams on the inside faces and radial teeth on the outside. The cam angle is steeper than the thread pitch, so any attempt to rotate the bolt loose makes the washers lift against each other and increases tension instead. The teeth grip the bolt head and mating surface so movement happens only across the cams.
Do Nord-Lock washers come as pairs?
Yes. They are supplied as pre-assembled pairs and must be fitted as a pair, cams facing each other, with the teeth against the bolt head or nut and the mating surface.
Which Nord-Lock washer do I need?
Choose by bolt size, bolt material and environment. Steel NL suits most steel bolts up to grade 12.9. Choose the enlarged (sp) version for oversized or slotted holes and soft surfaces. Choose stainless NLss for A4 stainless bolts, and 254 SMO or nickel alloys for seawater, chemicals or high heat.
Can Nord-Lock washers be reused?
They can generally be reused as long as the cams and teeth are undamaged and the washers are not worn. Check them at each service and replace any pair that is damaged.
Do you deliver across the UAE?
Yes. TEC supplies Nord-Lock washers across the UAE, including Abu Dhabi, Dubai, Sharjah and the Northern Emirates, and supports GCC enquiries. Send the type, size and quantity on WhatsApp for price and availability.

Need genuine Nord-Lock washers quickly?

Send the washer type, bolt size and quantity. Our team will reply with price and availability.

Send enquiry on WhatsApp