





Nord-Lock Group bolting solutions supplied by TEC in the UAE – wedge-locking washers, mechanical and hydraulic bolt tensioners, and pivot pin systems that keep critical bolted joints safe and secure.
The Nord-Lock Group is a world leader in bolting solutions, and TEC supplies its complete range in the UAE. Four specialist brands work together to secure bolted joints in the most demanding applications – from heavy machinery and steel structures to oil & gas, power generation, mining and marine equipment.
Nord-Lock washers are supplied in pairs, with cams on one side and radial teeth on the other. Instead of relying on friction, they lock the joint using tension: the wedge effect blocks the bolt from rotating loose, and any loosening movement actually increases tension. The washers are reusable and keep joints secure under severe vibration and dynamic loads.
Superbolt multi-jackbolt tensioners (MJTs) replace slow, inaccurate or unsafe turn-torque bolting. A ring of small jackbolts stretches the main stud evenly against a hardened washer, so large bolts can be preloaded with simple hand tools. Superbolt expansion sleeve coupling bolts use a radially expanding conical sleeve to fit the bolt precisely in its hole and protect couplings against slippage.
Boltight hydraulic tensioners use high-pressure hydraulics to stretch the stud before the nut is run down, allowing one or many studs to be tensioned simultaneously for even, accurate preload. Boltight hydraulic nuts build the tensioner into the nut itself – ideal for fasteners that are removed frequently, such as press columns.
The Expander System eliminates lug wear on pivot pins. When the outer nut is tightened, a tapered bushing expands against the pin and spreads the load across the lower half of the lug. Worn bushings can simply be replaced – no line boring or welding required – and the system is backed by a 10-year / 10,000-hour warranty.
| Nord-Lock (wedge-locking washers) | Original Washer Series, X Washer Series, Steel Construction Series, Wheel Nuts, Combi Bolt Washers (SEMS), Customised Solutions |
| Superbolt (mechanical tensioning) | Tensioners, Flexnuts, HyFit, EzFit, Superbolt Tool, Customised Solutions |
| Boltight (hydraulic tensioning) | Standard Bolt Tensioners, Sub Sea Tensioners, Typhoon Tensioners, Echometer Series (ultrasonic elongation measurement), TSR+ Tensioners, Xtra Range Tensioners, Foundation Tensioners, Hydraulic Nuts, Closure System / Rotor / Casing Tools, Engine Tool Sets, Accessories, Custom Tensioner Solutions |
| Expander (pivot pin systems) | Nut & Washer, Bolt & Washer, Bolt & Recessed Washer, Through Bolt, Flat Head, Multi-Bolt, Stepped Pin, Offshore, Customised Systems |
| Expander bushing expansion | Up to 0.800″ (approx. 20 mm) |
| Expander warranty | 10 years / 10,000 operating hours |
| Tensioning accuracy | Approx. ±10% preload (Superbolt / Boltight) |