Skip to main content

TEC

/
/
CEJN 1500 bar Tensioning Hose Assemblies

CEJN 1500 bar Tensioning Hose Assemblies

CEJN 1500 bar Tensioning Hose Assemblies

A genuine CEJN alternative for 1,500 bar bolt tensioning systems

Description

CEJN 1500 bar Tensioning Hose Assemblies

Ultra-High Pressure Hose with G 1/4″ 120° Cone Ends

CEJN ultra-high pressure hose assemblies connect hydraulic tensioning pumps to bolt tensioners and manifolds at up to 1,500 bar. With standard G 1/4″ 120° cone end fittings, they are a direct alternative to the threaded tensioner hoses commonly used on 1,500 bar tensioning systems.

Each assembly can carry the CEJN Identification System (CIS) tag for full traceability.

Key Features

Genuine CEJN Hoses for Bolt Tensioning

TEC supplies CEJN ultra-high pressure hoses in the UAE, cut and assembled to the lengths your tools need, typically from 1 m up to 30 m. Send us the part number or end connection of the hose you use today and TEC will match it with the right CEJN assembly.

Technical Data

SpecificationCEJN 1500 bar UHP hose
Max. working pressure150 MPa (1,500 bar)
Min. burst pressure375 MPa (3,750 bar)
Hose sizeDN 5
Inner / outer diameter4.9 mm / 9.5 mm
Min. bend radius95 mm
Reinforcement2 steel wire layers
Inner tube / coverPOM / PA
End connectionsG 1/4″ male, 120° external cone (other ends on request)
Temperature range-10 °C to +70 °C
LengthsMade to order, typically 1 m to 30 m

Technical data as published by CEJN. Hoses for 700 to 3,000 bar are also available.